Tesla Model 3/Y Center Console Vinyl Wraps
Tesla Model 3 Center Console Vinyl Wraps
After lots of testing, we're really excited to present our vinyl wraps for your Model 3 center console.
Why do you need these? If you have a Model 3, it can't have escaped your attention that piano black finish is a total fingerprint magnet, and easily scratched. Our vinyl wraps both protect and enhance the appearance of the console with some really cool finishes. Some details:
- 3M 1080 film - with it's Air Release technology, it's easily the best vinyl for this application
- Each piece is Precision-cut for a perfect installation
- Supplied with an application tool to make the installation really easy
- 'No tears' installation guarantee :-)
Abstract Ocean video shows how to install (and remove) the wrap. The 3M vinyl is very forgiving, and with a little time and patience, you can achieve an 'OEM' finish - anyone sitting in your Model 3 won't know that it didn't arrive that way from the factory.
Please take the time to watch the videos, but, if you do have an issue, just reach out to us and we'll ship you the first replacement piece at no cost within one business day.
Q. I screwed up one of the pieces. What can I do?
A. The vinyl is really forgiving, and if there's a crease or stretch, applying some warm air (from a hair drying, or even leaving your car in the sun) can often restore its original shape and allow you a do-over. But, if all hope is lost, you can take advantage of our 'no tears' guarantee, and we'll send your first replacement piece completely free. If you need more than one piece, then there's a flat charge of $10 for each additional piece (but no, we can't send you 3 different replacement pieces to make a cheap full set ;-))
Q. Which is easier to install?
A. The heavier textured finishes (carbon fiber, matrix black) are easier, as they're slightly thicker, and more tolerant of the odd speck of dust that might get caught under the film. The Brushed finishes are the next, since they still have a texture and are slightly heavier. The smooth finished do take a bit longer to install, and the surface must be completely clean.
Q. How are these made?
A. Each piece is cut in-house using commercial vinyl cutters, following a custom design created in a vector graphics package. We only use 3M 1080 vinyl due to it's long-life and ease of application.
Q. I'd like another color/finish
Q. Does it completely cover all the piano black plastic?
A. If fitted perfectly, yes. In reality, a completely perfect application can be challenging, but all the lines and curves are smoothly cut, and even if there's a little bit of the piano black showing through, the sharp edges will ensure it's not noticeable.
Q. Can this be removed?
A. Yes, easily. The longer the vinyl is there, the stronger the bond becomes, but it can always be removed without causing any damage to the original piano black finish. Just lift an edge, and start to carefully pull it away at a sharp angle.
Q. I'm not sure I can do this :-/
A. If you're hesitant, check your local vinyl and window tint shops. This is no more 15 minutes work for an experienced pro, so if you're already there to get your windows tinted, or a clear-bra, the cost should be minimal.
Q. What's your favorite?
A. We love the brushed finished. The Brushed Titanium is the closest match to the metal dash trim in the Model 3, but the brush steel has a really nice hue to it, so it's tough to chose between them. The Carbon Fiber is the easiest to fit, and more typical of what you'd find inside a car, so we love that one too, but as always it's a personal thing.